Yes. You would normally 'train' the KAT500 in segments over each band
for each antenna. This is done in Auto mode. The recommended segments
are listed in the back of the KAT500 manual. Each match setting is
stored in its own memory.
You would then leave the KAT500 in Manual mode and each time you
transmit, it should detect the band/frequency and switch to the
appropriate memory.
Memory settings are retained after power down.
73,
Alan. G4GNX
------ Original Message ------
From: "Ted Edwards W3TB" <[email protected]>
To: "KENT TRIMBLE" <[email protected]>
Cc: "[email protected]" <[email protected]>
Sent: 12/09/2020 23:22:48
Subject: Re: [Elecraft] K1ZTE - KAT500
Related question: Should the KAT-500 hold memorized settings after
shutting down to ready for use another time?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
