The KAT500 retains matched memories for each band/frequency per antenna.
So yes, you have 3 solutions per band/frequency. It has quite a lot of
memories. :-D
73,
Alan. G4GNX
------ Original Message ------
From: "w4sc" <[email protected]>
To: "[email protected]" <[email protected]>
Sent: 13/09/2020 00:38:08
Subject: Re: [Elecraft] K1ZTE - KAT500
I have the KAT/KPA500 setup with the K3. It works great when trained, tracking
VFO. I had only one antenna available per band at the time using the setup.
Currently the “shack” is undergoing a move and renovation.
I will be back on with possibly as many as 3 antennas available on a single
band. I have looked for answer to the following question.
Is the training saved per-BAND/ANTENNA combination tuning solution?.. possibly
resulting in 3 solutions per band. If there is only one solution there are
implications in switching to a different antenna in a band with multiple
antenna choices. In my case the future may hold a vertical, beam, and
horizontal loop on 40M.
Ben W4SC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
