Nope. I just changed the name of the codec for my 7300 from IC7300
Audio In to IC7300a Audio In. I rebooted Windows and WJST-X stills
thinks it is IC7300 Audio In. This is somewhat of a mute point as it is
still the same codec and WJST-X still works fine. My point is only
that WJST-X is not refreshing from the sound panel after an install.
Rich
On 9/12/2020 19:57 PM, Neil Zampella wrote:
Actually ... WSJT-X only uses what windows tells it is available.
After Windows updates its been found that Windows will scramble the
audio devices, especially if they are USB devices.
What has been found to work is to RENAME the device you use in the Sound
Control Panel. Bring up the Sound Control Panel, find the USB adapter
normally used for sound input to WSJT-X under Speakers and double click
to open the properties. On the first tab you can rename it to what you
want to use, such as WSJT-X Sound OUT. Do the same with the microphone
device and rename to WSJT-X Sound IN.
Click the OK button, and then close the Sound Control Panel. I'd do a
restart to make sure that Windows has saved that info. Then open
WSJT-X and select them on the Audio setting tab.
Most of the users who have done this have not see the 'scrambled audio
device' issue again.
Neil, KN3ILZ
On 9/12/2020 9:22 AM, Rich wrote:
WJST-X does a very poor job of loading the current sound devices from
Windows when you run the program. It appears to load whatever
existed in the Sound Panel when it was installed.
So use caution that what you see in the WJST-X audio window vs. what
actually exists in the Windows Sound Panel.
To me it appears to be more of WJST-X issue that a Windows issue
Maybe there is a way to fix this, but I do not know what it is.
Rich
On 9/12/2020 7:20 AM, Ian Kahn, NV4C wrote:
Joe,
Check your WSJT-X settings and ensure you still have the correct
sound card selected and that something didn't change your output
target/radio selection. Also, if you're running Windows, make sure
something else didn't change any of your sound card settings from
what you had prior to upgrading WSJT-X.
73 de,
Ian, NV4C
On 9/11/20 11:23 PM, W8JH wrote:
I was working FT8 tonight and decided to upgrade from WSJT 2.0 to
the latest
2.2.
Now I have no audio on transmit. All other functions work. Decodes,
band
change etc.
It puts the K3s in transmit but no audio. I have adjusted the Mic gain
without effect.
I double checked that WSJT has the K3s codec for transmit selected.
Windoze
shows it working as well.
I’m totally stumped and wish I hadn’t upgraded now. Any ideas how to
proceed
?
73,
-----
73,
Joe, W8JH
K3s, KPA 500, KAT 500 and KX3 happy user.
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
