Doug,
I have doubts that the toroid for L33 has been changed.
C174 should be 82pF - call support to get a proper capacitor.
Do not remove turns from L33.
The BFO should come into range with those values. Check the high and
low frequencies before doing anything else.
73,
Don W3FPR
On 10/2/2020 10:27 PM, Douglas Hagerman via Elecraft wrote:
Hello K2 enthusiasts.
I’m installing the “Improving Temperature Stability of the Elecraft K2
Transceiver 11/15/2002 Rev. H” mod into my old radio. It’s going smoothly
except for confusion on my part about one of the capacitors.
The original C174 is to be removed, it is marked “331” which is 330 pF.
The replacement in the kit envelope is a “390” 39 pF cap. But the instructions
are confusing, because they say that the replacement should be 82 pF. And then,
according to the instructions, if that turns out to not be enough, you can add
more capacitance up to 200 pF at C174—or if desperate, add turns to the toroid
L33.
My guess is that somewhere along the line the number of turns on L33 was
changed to match a 39 pF cap, and the instructions fell behind. Does that make
sense? Or should I hunt down an 82 pF cap?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
