Make sure all connectors are firmly seated. Sent from my iPhone ...nr4c. bill
> On Nov 23, 2020, at 6:05 PM, Thaire Bryant <tbry...@myfairpoint.net> wrote: > > I just finished rewiring and rearranging my operating position (K3s, KPA1500 > and P3) along with my station computer. On reassembling I found that all was > good except for the P3, I lost the signal display and the waterfall. I have > no problem connecting to the three utilities and all show up to date > firmware. The P3 shows the center frequency (VFO A) and displays PEP and SWR. > I have rechecked all connections and all appear to be correct. Any ideas? > I can not find any help in troubleshooting areas of manual or Fred Cary book. > > Thanks & 73 > Thaire. W2APF > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com