Thaire, Seems that you are not getting the K3 IF output into the P3. 1st - Make sure the BNC cable is on the 2nd from top not the top connector on the P3(Don't ask how I know). 2nd - BNC connectors can sometimes be fussy. I had an intermittent on the output of the K3. I used a pick and "tightened" the female by bending the center female. This was several years ago after moving into a new house with a new Ham Shack.
73 George AI4VZ On Mon, Nov 23, 2020 at 6:55 PM Nr4c <[email protected]> wrote: > Make sure all connectors are firmly seated. > > Sent from my iPhone > ...nr4c. bill > > > > On Nov 23, 2020, at 6:05 PM, Thaire Bryant <[email protected]> > wrote: > > > > I just finished rewiring and rearranging my operating position (K3s, > KPA1500 and P3) along with my station computer. On reassembling I found > that all was good except for the P3, I lost the signal display and the > waterfall. I have no problem connecting to the three utilities and all > show up to date firmware. The P3 shows the center frequency (VFO A) and > displays PEP and SWR. I have rechecked all connections and all appear to > be correct. Any ideas? I can not find any help in troubleshooting areas > of manual or Fred Cary book. > > > > Thanks & 73 > > Thaire. W2APF > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
