Not just the levels but the right input source on the K3?
73,
Rick NK7I
On 12/11/2020 12:28 PM, Don Wilhelm wrote:
Joe,
Do you have the audio levels set right for transmit?
Go to my webpage www.w3fpr.com and look at the last article in the
left column.
73,
Don W3FPR
On 12/11/2020 3:10 PM, Joe K2UF wrote:
I am trying to get FT8 running on my K3 using Rig blaster advantage.
Everything works except no transmit RF output.
Enable TX puts K3 into transmit but no RFoutput. Have tried
adjusting RBA
xmit level and K3 mic output. No joy.
.Anyone able to share their PTT settings.
Thanks,
Joe K2UF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
