----- On Jan 11, 2021, at 6:31 PM, <elecraft-requ...@mailman.qth.net> wrote:
| Send Elecraft mailing list submissions to | elecraft@mailman.qth.net | To subscribe or unsubscribe via the World Wide Web, visit | http://mailman.qth.net/mailman/listinfo/elecraft | or, via email, send a message with subject or body 'help' to | elecraft-requ...@mailman.qth.net | You can reach the person managing the list at | elecraft-ow...@mailman.qth.net | When replying, please edit your Subject line so it is more specific | than "Re: Contents of Elecraft digest..." | Today's Topics: | 1. Test Report on Running WSJT-X with Apple Silicon using a KX3 | (AL7CR) | 2. KE7X Website (eda...@aya.yale.edu) | 3. Re: KE7X Website (Don Wilhelm) | 4. KPA/KAT500 wanted (Lyn Norstad) | 5. POTA activation (JP Douglas) | 6. Testing (David Herring) | 7. Re: Testing (Wayne Burdick) | 8. Re: Testing (Paul Van Dyke) | 9. Elecraft CW Net Announcement (kevinr) | 10. K2 updates needed (Chuck Chandler) | 11. The 80 Meter Net (Paul Van Dyke) | 12. Re: K2 updates needed (Don Wilhelm) | 13. K3 and 2m amp ptt (Rajiv Dewan) | 14. Re: K3 and 2m amp ptt (Don Wilhelm) | 15. Elecraft CW Net Report (kevinr) | 16. Re: KV5J's line of Digital Displays for Elecraft's W2, | KXPA100, KPA500, and KPA1500 (Keith Ennis) | 17. Re: K2 updates needed (Chuck Chandler) | 18. Looking to buy a krc2 (wa8...@wa8wzg.net) | 19. K2 speaker dont mute (dl7le) | 20. Re: K2 speaker dont mute (Don Wilhelm) | 21. XV144 external Oscillator? (Martin) | 22. Re: XV144 external Oscillator? (Don Wilhelm) | 23. P3 Issue (Ken Widelitz) | 24. Re: P3 Issue (Tom Doligalski) | 25. Re: P3 Issue (g...@gmx.net) | 26. P3 Issue Resolved (Ken Widelitz) | ---------------------------------------------------------------------- | Message: 1 | Date: Thu, 07 Jan 2021 18:07:58 -0800 | From: AL7CR <al...@mooseaviation.com> | To: Elecraft <elecraft@mailman.qth.net> | Subject: [Elecraft] Test Report on Running WSJT-X with Apple Silicon | using a KX3 | Message-ID: <5187c8c9-d80b-46fe-a968-9cfcfb052...@www.fastmail.com> | Content-Type: text/plain | There are a variety of reports on doing this ranging from it being impossible to | no changes are required. In my experience it runs perfectly and is a joy to | use. There is only one difference between using Apple Silicon and any other | Mac. | My setup is: | KX3 | Base configuration M1 Macbook | Apple thunderbolt to USB cable | Standard Elecraft USB cable for the KX3 | Sabrent Sound Card dongle | Anker self powered USB hub | WSJT-X 2.2.2 for the Mac as downloaded from the WSJT website. | The only unusual requirement is that the instructions for changing the memory | size given in the software instructions will not work for M1 Macs. Instead you | use the following commands in the terminal: | sudo sysctl -w kern.sysv.shmmax=104857600 | sudo sysctl -w kern.sysv.shmall=25600 | The command | sysctl -a | grep sysv.shm | will verify that the change is made. At the moment the above must be done on | each reboot. | That's it, otherwise it works just as it does on an Intel Mac. I have my serial | port set for 38,400 baud, 8,2,none and am running full CAT control with rig | split enabled. | It appears as of today, January 7, that the Fldigi folks are still working on a | version that will work on Apple Silicon. In my testing the latest standard Mac | version would not load. | ------------------------------ | Message: 2 | Date: Thu, 7 Jan 2021 19:43:51 -0700 | From: <eda...@aya.yale.edu> | To: <elecraft@mailman.qth.net> | Subject: [Elecraft] KE7X Website | Message-ID: <002d01d6e568$19a2fdc0$4ce8f940$@aya.yale.edu> | Content-Type: text/plain; charset="us-ascii" | Courtesy of Vic DiCiccio, VE3YT, I have the contact information for a | representative of Fred's family. I would be happy to inquire about | permission to repost the website contents, but first I will need someone to | tell me exactly what the application would be if permission were granted. | Looking into such accommodations may be in my wheelhouse; talking about | website structure is not. | Please reply directly: eda...@aya.yale.edu | Tnx, | Ted, KN1CBR | ------------------------------ | Message: 6 | Date: Wed, 6 Jan 2021 22:10:12 -0600 | From: Tony KX3H <kx3h.ra...@gmail.com> | To: elecraft@mailman.qth.net | Subject: Re: [Elecraft] KE7X Website Expired | Message-ID: <482a56ae-7612-88ca-d168-acd2a6d29...@gmail.com> | Content-Type: text/plain; charset=utf-8; format=flowed | Thanks Scott, I have a Linux laptop that I can give-it-a-go. At least | I'll make myself a personal copy of the site, then figure out the | copyright implications and get approval before doing anything to be | respectful. | Too bad we can't just throw a few bucks to spin up the domain | again...darn internet pirates always want money lol. | ------------------------------ | Message: 3 | Date: Fri, 8 Jan 2021 01:25:07 -0500 | From: Don Wilhelm <donw...@embarqmail.com> | To: eda...@aya.yale.edu, elecraft@mailman.qth.net | Subject: Re: [Elecraft] KE7X Website | Message-ID: <d394f339-c4d6-d86b-fa89-5fdcfdbde...@embarqmail.com> | Content-Type: text/plain; charset=utf-8; format=flowed | Ted, | You might want to contact the folks who preserved the website of Tom | Hammond N0SS (SK) for information. | It is preserved as a subpage on the MMARC website. | Jim Biggerstaff the_biggersta...@embarqmail.com is the major contact. | 73, | Don W3FPR | On 1/7/2021 9:43 PM, eda...@aya.yale.edu wrote: | > Courtesy of Vic DiCiccio, VE3YT, I have the contact information for a | > representative of Fred's family. I would be happy to inquire about | > permission to repost the website contents, but first I will need someone to | > tell me exactly what the application would be if permission were granted. | > Looking into such accommodations may be in my wheelhouse; talking about | > website structure is not. | > Please reply directly: eda...@aya.yale.edu | > Tnx, | > Ted, KN1CBR | ------------------------------ | Message: 4 | Date: Fri, 8 Jan 2021 11:12:27 -0600 | From: "Lyn Norstad" <l...@lnainc.com> | To: <Elecraft@mailman.qth.net> | Subject: [Elecraft] KPA/KAT500 wanted | Message-ID: <155e01d6e5e1$71237600$536a6200$@LNAINC.com> | Content-Type: text/plain; charset="us-ascii" | Looking for recent KPA500 and KAT500 to serve as backups. | Please respond privately with age / serial number / revision level. Please | include Fault Table for each unit. | Shipping to 60175. | Thanks! | 73 | Lyn, W0LEN < W0LEN (at) LNAINC (dot) com > | ------------------------------ | Message: 5 | Date: Fri, 8 Jan 2021 12:39:46 -0500 | From: JP Douglas <kb1...@gmail.com> | To: Elecraft List <elecraft@mailman.qth.net> | Subject: [Elecraft] POTA activation | Message-ID: <833342d5-f8c0-4ef5-aea8-39773bdcc...@gmail.com> | Content-Type: text/plain; charset=us-ascii | Hi all, | I will be activating Fort Edgecomb in Maine (K-7859) for Parks On The Air | together with WC1G and KC1KTJ this Sunday, 10 Jan from 17:00 to 20:00 UTC on | 15, 20 and 40m. | Looking forward to talking to fellow Elecrafters. | I apologise for no Elecraft content. | 73 de Jose Douglas KB1TCD | Sent from my iPad | ------------------------------ | Message: 6 | Date: Sat, 9 Jan 2021 17:27:58 -0700 | From: David Herring <david.n5...@gmail.com> | To: Elecraft Mail List <elecraft@mailman.qth.net> | Subject: [Elecraft] Testing | Message-ID: <6c856cdd-22d6-42b1-9b61-588f0e8ce...@gmail.com> | Content-Type: text/plain; charset=us-ascii | Just testing...I seem to have not received anything from this list since | yesterday morning. Sorry for any inconvenience. | 73, | David - N5DCH | ------------------------------ | Message: 7 | Date: Sat, 9 Jan 2021 16:59:18 -0800 | From: Wayne Burdick <n...@elecraft.com> | To: David Herring <david.n5...@gmail.com> | Cc: Elecraft Reflector <elecraft@mailman.qth.net> | Subject: Re: [Elecraft] Testing | Message-ID: <ec3ad9a0-e935-46ee-8f92-bfa5c0b0a...@elecraft.com> | Content-Type: text/plain; charset=us-ascii | Hi David, | Works fine here. | I've been working the NA CW contest. 40 m in particular is hopping. Gave me a | chance to test a lot of K4 software refinements we've been working on. | 73, | Wayne | N6KR | > On Jan 9, 2021, at 4:27 PM, David Herring <david.n5...@gmail.com> wrote: |> Just testing...I seem to have not received anything from this list since | > yesterday morning. Sorry for any inconvenience. | > 73, | > David - N5DCH | ------------------------------ | Message: 8 | Date: Sat, 9 Jan 2021 20:08:56 -0500 | From: Paul Van Dyke <pvandyke1...@gmail.com> | To: Elecraft Reflector <elecraft@mailman.qth.net> | Subject: Re: [Elecraft] Testing | Message-ID: | <caepkcukjomdesnht29_iaz9mdnlbnn2k_0enxsxg9doaht2...@mail.gmail.com> | Content-Type: text/plain; charset="UTF-8" | Major CW contest on ... all is quiet | Paul KB9AVO | On Sat, Jan 9, 2021 at 8:01 PM Wayne Burdick <n...@elecraft.com> wrote: | > Hi David, | > Works fine here. | > I've been working the NA CW contest. 40 m in particular is hopping. Gave | > me a chance to test a lot of K4 software refinements we've been working on. | > 73, | > Wayne | > N6KR | > > On Jan 9, 2021, at 4:27 PM, David Herring <david.n5...@gmail.com> wrote: | > > Just testing...I seem to have not received anything from this list since | > yesterday morning. Sorry for any inconvenience. | > > 73, | > > David - N5DCH | > ______________________________________________________________ | > Elecraft mailing list | > Home: http://mailman.qth.net/mailman/listinfo/elecraft | > Help: http://mailman.qth.net/mmfaq.htm | > Post: mailto:Elecraft@mailman.qth.net | > This list hosted by: http://www.qsl.net | > Please help support this email list: http://www.qsl.net/donate.html | > Message delivered to pvandyke1...@gmail.com | ------------------------------ | Message: 9 | Date: Sat, 9 Jan 2021 20:20:11 -0800 | From: kevinr <kev...@coho.net> | To: Elecraft Reflector <elecraft@mailman.qth.net> | Subject: [Elecraft] Elecraft CW Net Announcement | Message-ID: <34cca377-f1f4-2cbc-ae43-c2c307a4b...@coho.net> | Content-Type: text/plain; charset=utf-8; format=flowed | Good Evening, | ?? I saw a large ball of burning gas in the sky today.? Then I realized | it was the sun.? How soon we forget.? This sight was buffered by the | stiff wind and chilly temperatures.? Smells like snow.? Good day for a | hike.? I took a path quite less taken, steep in fact.? I found elk sign | while checking the perimeter. | ? The sun has been blank.? Six days now without a spot.? I thought we | had passed that portion of the cycle.? Solar flux has dropped to 75 | sfu.? But the former sunspot area is due to reappear soon.? The auroral | has increased since I last noticed.? Our ionosphere is getting excited; | must be the CW contest activity. | Please join us tomorrow on: | 14050 kHz at 2200z Sunday? (2 PM PST Sunday) | ?7047 kHz at 0030z Monday? (4:30 PM PST Sunday) | 73, | ?? Kevin. KD5ONS | - | ?Thus conscience does make cowards of us all, | ?and thus the native hue of Resolution | ?Is sicklied o'er, with the pale cast of Thought, | ?And enterprises of great pitch and moment, | ?with this regard their Currents turn awry, | ?And lose the name of Action. | ------------------------------ | Message: 10 | Date: Sun, 10 Jan 2021 09:14:01 -0500 | From: Chuck Chandler <chandler...@gmail.com> | To: elecraft@mailman.qth.net | Subject: [Elecraft] K2 updates needed | Message-ID: | <caooyq89fmb63fs+xj33j2p+9n8usqcdg_o4tpxb1qpp0fwl...@mail.gmail.com> | Content-Type: text/plain; charset="UTF-8" | I've begun volunteering as part of the radio gang on board the museum ship | USS Slater. There is a K2 there, Serial # 6980. Is there a method to | determine what updates are available, and how to determine if they are | already performed? | I recall something recently on the list. | 73 de Chuck, WS1L | chandler...@gmail.com | ------------------------------ | Message: 11 | Date: Sun, 10 Jan 2021 10:06:51 -0500 | From: Paul Van Dyke <pvandyke1...@gmail.com> | To: Elecraft Reflector <elecraft@mailman.qth.net> | Subject: [Elecraft] The 80 Meter Net | Message-ID: | <CAEPKcU=3Lmd+T=neW5xZMw6cSbdSEWx8OHmmW6SZc=tufgf...@mail.gmail.com> | Content-Type: text/plain; charset="UTF-8" | Is located on 3.817 at 01:00 UTC on Sunday Night to allow more General | Class Ops | Come and see if the band has stretched enough to get thru operators to join | the fun,, | Don't forget all the other Elecraft Nets.. whether it is CW, SSB | Come Join the Fun | 73's | Paul Van Dyke - KB9AVO | 80 Meter Net | ------------------------------ | Message: 12 | Date: Sun, 10 Jan 2021 11:05:52 -0500 | From: Don Wilhelm <donw...@embarqmail.com> | To: Chuck Chandler <chandler...@gmail.com>, elecraft@mailman.qth.net | Subject: Re: [Elecraft] K2 updates needed | Message-ID: <11bf92c2-c687-b435-5233-f71460f8b...@embarqmail.com> | Content-Type: text/plain; charset=utf-8; format=flowed | Chuck, | Any K2 above SN 4660 is fully up to date. | If your real question is about options rather than updates, lift the | cover to see which options are installed. | 73, | Don W3FPR | On 1/10/2021 9:14 AM, Chuck Chandler wrote: | > I've begun volunteering as part of the radio gang on board the museum ship | > USS Slater. There is a K2 there, Serial # 6980. Is there a method to | > determine what updates are available, and how to determine if they are | > already performed? | ------------------------------ | Message: 13 | Date: Sun, 10 Jan 2021 15:39:27 -0500 | From: Rajiv Dewan <rmde...@gmail.com> | To: elecraft <Elecraft@mailman.qth.net> | Subject: [Elecraft] K3 and 2m amp ptt | Message-ID: <e85a4528-d0cc-459a-8bdb-f1d6379d8...@gmail.com> | Content-Type: text/plain; charset=us-ascii | Hello all, | I would like to have PTT out signal from my K3 that is ONLY activated when the | internal K144XV transverter is transmitting. I thought I might use the KRC2 | with the K7MDL mod where the 8R signal is used to generate a band specific PTT | output. The problem: where do I find an 8R or equivalent (I guess 5R will do) | signal on the exterior of the K3? Can a pin on the ACC connector be used for | this purpose? | BTW, I tried building a small interface that activates the amp PTT when a 5V | shows on the transverter output. Problem: 5V is on transverter output when K3 | transmit on any band. | Other ideas? | Thanks, | Raj, N2RD | K3 #170 | -- | Rajiv Dewan | rmde...@gmail.com | ------------------------------ | Message: 14 | Date: Sun, 10 Jan 2021 16:08:42 -0500 | From: Don Wilhelm <donw...@embarqmail.com> | To: Rajiv Dewan <rmde...@gmail.com>, elecraft | <Elecraft@mailman.qth.net> | Subject: Re: [Elecraft] K3 and 2m amp ptt | Message-ID: <8baec16d-c0fc-809a-fbea-7c70f2c9a...@embarqmail.com> | Content-Type: text/plain; charset=utf-8; format=flowed | Raj, | A simple logic circuit to detect all zeros on the 4 band data lines and | the presence of Keyout-lp would do that task easily. | 73, | Don W3FPR | On 1/10/2021 3:39 PM, Rajiv Dewan wrote: | > Hello all, |> I would like to have PTT out signal from my K3 that is ONLY activated when the |> internal K144XV transverter is transmitting. I thought I might use the KRC2 |> with the K7MDL mod where the 8R signal is used to generate a band specific PTT |> output. The problem: where do I find an 8R or equivalent (I guess 5R will do) |> signal on the exterior of the K3? Can a pin on the ACC connector be used for | > this purpose? |> BTW, I tried building a small interface that activates the amp PTT when a 5V |> shows on the transverter output. Problem: 5V is on transverter output when K3 | > transmit on any band. | ------------------------------ | Message: 15 | Date: Sun, 10 Jan 2021 19:43:57 -0800 | From: kevinr <kev...@coho.net> | To: Elecraft Reflector <elecraft@mailman.qth.net> | Subject: [Elecraft] Elecraft CW Net Report | Message-ID: <de9ead07-4314-50e6-2f5c-c5a130820...@coho.net> | Content-Type: text/plain; charset=utf-8; format=flowed | Good Evening, | Both bands were surprisingly strong.? Low noise with little QSB was very | pleasant.? I had to reduce my gain as each net went on. Cool weather | everywhere which fits the season.? Most reported stay at home tasks | which also fits.? I expect to leave the house later this week for the | first time this year.? I have worked from home off and on since the | '70s, it has gotten much easier. | The lack of sunspots did not seem to matter.? Signals were very clear.? | I can't find an image of the back side of the sun.? An active area | slipped over the limb about two weeks ago.? It is due to return any time | now.? Hopefully it did not dissipate along the way. | ? On 14050.5 kHz at 2200z: | NO8V - John - MI | W0CZ - Ken - ND | AB9V - Mike - IN | K6XK - Roy - IA | K4JPN - Steve - GA | KL7CW - Rick - AK | ? On 7047.5 kHz at 0030z: | W0CZ - Ken - ND | K4WJ - John - FL | K6PJV - Dale - CA | K0DTJ - Brian - CA | W8OV - Dave - TX | ?? Enjoy your week 73, | ?????? Kevin.? KD5ONS | - | First, do no harm.? It would be wonderful if they taught this to | software engineers. | ------------------------------ | Message: 16 | Date: Mon, 11 Jan 2021 13:31:24 +0000 (UTC) | From: Keith Ennis <nela...@yahoo.com> | To: "j...@rhodesend.net" <j...@rhodesend.net> | Cc: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net> | Subject: Re: [Elecraft] KV5J's line of Digital Displays for Elecraft's | W2, KXPA100, KPA500, and KPA1500 | Message-ID: <1307002430.326081.1610371884...@mail.yahoo.com> | Content-Type: text/plain; charset=UTF-8 | Sorry, you can only have 1 working at a time.? You can use a rs232 a/b switch to | switch between the 2. | Keith, KV5J | Keith | On Sunday, January 3, 2021, 11:33:42 AM CST, Jim Rhodes <jimk...@gmail.com> | wrote: | The question I have is, can I connect the Y-connector to the back of my KPA500 | and connect both my computer and the digital display with them both working? | On Sun, Jan 3, 2021, 09:07 Keith Ennis via Elecraft <elecraft@mailman.qth.net> | wrote: | > KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, and KPA1500 | > Digital Display Unit for Elecraft's W2 Watt Meter: |> With digital read out the Display Unit takes the guess work out of the LED light | > bar. | > Digital Display Unit for Elecraft's KXPA100 amplifier: |> Don't wait for a fault light to come on.? Keep an eye on 5 crucial readings at | > all times. | > 1. Power amplifier's heat sink temperature | > 2. Power amplifier's high voltage supply voltage | > 3. Power amplifier's current | > 4. Power amplifier's output power | > 5. SWR that the KXPA100 sees at its output | > Digital Display Unit for Elecraft's KPA500 amplifier: | > Instead of seeing only 1 crucial reading, monitor all 7 at the same time. | > 1. Power amplifier's heat sink temperature | > 2. Power amplifier's high voltage supply voltage | > 3. Power amplifier's current | > 4. Power amplifier's output power | > 5. SWR that the KPA500 sees at its output | > 6. Displays Operate/Standby mode | > 7. Displays Band amp is tuned to | > Digital Display Unit for Elecraft's KPA1500 amplifier: | > Displays the same display that is on the KPA1500 Amplifier? |> Change the display on the KPA1500 and the display changes to show this same | > screen | > All of the Digital Display Units: | > Display Unit can be located at a more visible location | > Up to the RS232 limit from unit | > Easy to read 2 line display | > No USB or serial cable to computer | > No com port in Windows to manage | > No computer needed | > Plug and Play |> Simply connect the SUPPLIED dc power cable (with inline on/off switch) from the | > DDU to power supply and SUPPLIED? SERIAL data jumper cable to the device | > Retains all functions of the front panel | > All displayed info obtained directly from the device | > Only 4" x 4" x 2" | > For more information and ordering go to:? ?http://www.kv5j.com/store | > Reviews: | > https://www.eham.net/reviews/view-product?id=14701 | > https://www.eham.net/reviews/view-product?id=14820 | > Keith, KV5J | > http://www.kv5j.com | > ______________________________________________________________ | > Elecraft mailing list | > Home: http://mailman.qth.net/mailman/listinfo/elecraft | > Help: http://mailman.qth.net/mmfaq.htm | > Post: mailto:Elecraft@mailman.qth.net | > This list hosted by: http://www.qsl.net | > Please help support this email list: http://www.qsl.net/donate.html | > Message delivered to jimk...@gmail.com | >?? | ------------------------------ | Message: 17 | Date: Mon, 11 Jan 2021 08:35:17 -0500 | From: Chuck Chandler <chandler...@gmail.com> | To: donw...@embarqmail.com | Cc: elecraft@mailman.qth.net | Subject: Re: [Elecraft] K2 updates needed | Message-ID: | <caooyq8-jmj-q4bhgc_k5qwqa7r9e9fsgp73y1czykfscyvd...@mail.gmail.com> | Content-Type: text/plain; charset="UTF-8" | Thanks to all for the info. It does appear no critical updates are | required. | 73 de Chuck, WS1L | chandler...@gmail.com | On Sun, Jan 10, 2021 at 11:05 AM Don Wilhelm <donw...@embarqmail.com> wrote: | > Chuck, | > Any K2 above SN 4660 is fully up to date. | > If your real question is about options rather than updates, lift the | > cover to see which options are installed. | > 73, | > Don W3FPR | > On 1/10/2021 9:14 AM, Chuck Chandler wrote: | > > I've begun volunteering as part of the radio gang on board the museum | > ship | > > USS Slater. There is a K2 there, Serial # 6980. Is there a method to | > > determine what updates are available, and how to determine if they are | > > already performed? | ------------------------------ | Message: 18 | Date: Mon, 11 Jan 2021 15:46:10 +0000 | From: wa8...@wa8wzg.net | To: elecraft <Elecraft@mailman.qth.net> | Subject: [Elecraft] Looking to buy a krc2 | Message-ID: <a7bec1db7a3acd264e0e1062452f8...@wa8wzg.net> | Content-Type: text/plain; charset=US-ASCII; format=flowed | To All... | I am looking to buy a KRC2 if anyone has on in excess to their needs.. | Please respond off line to the the listed email address.. | Thanks in advance,,, | Tom | N7GP | ex WA8WZG | ------------------------------ | Message: 19 | Date: Mon, 11 Jan 2021 17:54:15 +0100 | From: dl7le <dl...@darc.de> | To: Elecraft@mailman.qth.net | Subject: [Elecraft] K2 speaker dont mute | Message-ID: <20210111165417.83d0f7da2...@dd7438.kasserver.com> | Content-Type: text/plain; charset=utf-8 | Hello Yls and Oms.I have a problem with my K2. When turning the AF Audio knob | counterclockwise the speaker is not quiet.?Has anybody an idea how to fix this | problem ?Kind regards from germany73Sebo DL7LEVon meinem/meiner Galaxy gesendet | ------------------------------ | Message: 20 | Date: Mon, 11 Jan 2021 12:24:06 -0500 | From: Don Wilhelm <donw...@embarqmail.com> | To: dl7le <dl...@darc.de>, Elecraft@mailman.qth.net | Subject: Re: [Elecraft] K2 speaker dont mute | Message-ID: <7fe3d7bc-0b3f-26c0-d682-1272b3f1a...@embarqmail.com> | Content-Type: text/plain; charset=utf-8; format=flowed | I suspect that K2 SN is below 3000. If so, add the Alternate AF Gain | Wiring mod. While you are doing that, I recommend that you replace the | AF Gain control. | The easiest way to change the control is to cut the pins close to the | body, then alternately heat the two mounting tabs while rocking the pot | to remove the control. Remove the pins one at a time, clean up with | solder wick and if solder remains in the holes, push it out with a | wooden toothpick. | 73, | Don W3FPR | On 1/11/2021 11:54 AM, dl7le wrote: |> Hello Yls and Oms.I have a problem with my K2. When turning the AF Audio knob |> counterclockwise the speaker is not quiet.?Has anybody an idea how to fix this | > problem ?Kind regards from germany73Sebo DL7LEVon meinem/meiner Galaxy gesendet | ------------------------------ | Message: 21 | Date: Mon, 11 Jan 2021 23:10:47 +0100 | From: Martin <dm...@t-online.de> | To: elecraft <elecraft@mailman.qth.net> | Subject: [Elecraft] XV144 external Oscillator? | Message-ID: <bc840348-aa2a-d3ec-609a-8e8a15734...@t-online.de> | Content-Type: text/plain; charset=utf-8; format=flowed | Elecrafters, | i have a GPS-controlled LO 116MHz i would like to feed to the XV144 2m | external Transverter. Has anyone done this before ? | Thanks. | -- | 73! | Martin DM4iM | ------------------------------ | Message: 22 | Date: Mon, 11 Jan 2021 17:22:04 -0500 | From: Don Wilhelm <donw...@embarqmail.com> | To: Martin <dm...@t-online.de>, elecraft <elecraft@mailman.qth.net> | Subject: Re: [Elecraft] XV144 external Oscillator? | Message-ID: <f480a46f-0eac-8dee-420c-c8191a2aa...@embarqmail.com> | Content-Type: text/plain; charset=utf-8; format=flowed | Martin, | I have not done it, but the major problem I see is the question of "how | to get the signal inside the enclosure". There is precious little room | on the rear panel. You could go through the right side panel depending | on how you locate the oscillator with respect to the transverter. | 73, | Don W3FPR | On 1/11/2021 5:10 PM, Martin wrote: | > Elecrafters, | > i have a GPS-controlled LO 116MHz i would like to feed to the XV144 2m | > external Transverter. Has anyone done this before ? | > Thanks. | ------------------------------ | Message: 23 | Date: Mon, 11 Jan 2021 14:46:33 -0800 | From: Ken Widelitz <kwidel...@gmail.com> | To: Elecraft Support <supp...@elecraft.com>, Elecraft Reflector | <elecraft@mailman.qth.net> | Subject: [Elecraft] P3 Issue | Message-ID: | <cabs+snb1vao7kqy7qs8atgn_pf9eqksb8hius0px7hspvae...@mail.gmail.com> | Content-Type: text/plain; charset="UTF-8" | P3 stopped working. When turned on, the entire screen flashes from red to | green to blue to blank to grey to checkerboard to grey and then cycles | through those screens again, etc. I have done a reinitialization by holding | down the Label key while turning on the power. Nothing changes. | 73, Ken, K6LA / VY2TT | ------------------------------ | Message: 24 | Date: Mon, 11 Jan 2021 18:45:58 -0500 | From: Tom Doligalski <w...@mac.com> | To: Ken Widelitz <kwidel...@gmail.com>, Elecraft Support | <supp...@elecraft.com>, Elecraft Reflector <elecraft@mailman.qth.net> | Subject: Re: [Elecraft] P3 Issue | Message-ID: <mailman.27745.1610415111.3115.elecr...@mailman.qth.net> | Content-Type: text/plain; charset="utf-8" | Could the P3 be in DispTest mode? | Select Menu, the rotate the knob to ;this setting. Needs to be Off for normal | use. | Tom W4KX | From: Ken Widelitz | Sent: Monday, January 11, 2021 5:48 PM | To: Elecraft Support; Elecraft Reflector | Subject: [Elecraft] P3 Issue | P3 stopped working. When turned on, the entire screen flashes from red to | green to blue to blank to grey to checkerboard to grey and then cycles | through those screens again, etc. I have done a reinitialization by holding | down the Label key while turning on the power. Nothing changes. | 73, Ken, K6LA / VY2TT | ______________________________________________________________ | Elecraft mailing list | Home: http://mailman.qth.net/mailman/listinfo/elecraft | Help: http://mailman.qth.net/mmfaq.htm | Post: mailto:Elecraft@mailman.qth.net | This list hosted by: http://www.qsl.net | Please help support this email list: http://www.qsl.net/donate.html | Message delivered to w...@mac.com | ------------------------------ | Message: 25 | Date: Tue, 12 Jan 2021 01:59:08 +0100 | From: g...@gmx.net | To: elecraft@mailman.qth.net | Subject: Re: [Elecraft] P3 Issue | Message-ID: <7d3efe27-e055-9000-abec-a9285ade1...@gmx.net> | Content-Type: text/plain; charset=utf-8; format=flowed | You could first check if you get stable connection using the | PX3-utility. If that does not work, it could be an unstable power supply | issue (0,5A ~12V required). | Otherwise I suppose there is a loose connection inside of the P3. You | could check the cable from the main board to the display. The manual has | a section about replacing the display with useful pictures (fig 25&26). | 73 Gernot DF5RF | Am 11.01.2021 um 23:46 schrieb Ken Widelitz: | > P3 stopped working. When turned on, the entire screen flashes from red to | > green to blue to blank to grey to checkerboard to grey and then cycles | > through those screens again, etc. I have done a reinitialization by holding | > down the Label key while turning on the power. Nothing changes. | > 73, Ken, K6LA / VY2TT | > ______________________________________________________________ | > Elecraft mailing list | > Home: http://mailman.qth.net/mailman/listinfo/elecraft | > Help: http://mailman.qth.net/mmfaq.htm | > Post: mailto:Elecraft@mailman.qth.net | > This list hosted by: http://www.qsl.net | > Please help support this email list: http://www.qsl.net/donate.html | > Message delivered to g...@gmx.net | ------------------------------ | Message: 26 | Date: Mon, 11 Jan 2021 17:30:32 -0800 | From: Ken Widelitz <kwidel...@gmail.com> | To: Elecraft Reflector <elecraft@mailman.qth.net> | Subject: [Elecraft] P3 Issue Resolved | Message-ID: | <CABs+SNCcLPeheWvAtQxyWenkRGb+UGe1CEn9bV=1av0xmt7...@mail.gmail.com> | Content-Type: text/plain; charset="UTF-8" | Firmly wiggling the cables (for the 3rd time) resolved the problem. | Something is probably loose inside. Thanks to those who responded for the | suggestions. | 73, Ken, K6LA / VY2TT | ------------------------------ | _______________________________________________ | Elecraft mailing list | Post to: Elecraft@mailman.qth.net | http://mailman.qth.net/mailman/listinfo/elecraft | You must be a subscriber to post. | Elecraft web page: http://www.elecraft.com | End of Elecraft Digest, Vol 201, Issue 14 | ***************************************** ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com