I have been using Top Ten band decoders for decades in many different
environments both in the US and the Caribbean and I have never seen an
RFI issue with it. N3RD also offers excellent support. Unfortunately
I am not sure if Top Ten is still in business, all products appear to
be out of stock.
John KK9A
K7HP wrote:
Tom - I will give you some unsolicited advice-- The KRC2 was the worst
RFI sucking piece of gear I ever owned.
I think that being hooked to the guts of the processor in the K3 was a
killer -no amount of fiddling would calm
it down. Was "usable" at 100 watts but my 80 meter antenna runs across
roof about 15 feet above my shack
and it would go berserk on 80 at 1500 .I ended up buying BCD to serial
boards from UNIFIED MICROSYSTEMS
they are opitcally coupled and just take the BCD out of the K3 - They
also sell hi side relay driver board as well -
https://www.unifiedmicro.com/decoder.html
In my case I put both boards inside the control box for my Array
Solutions Ratpack 6 antenna switch. It has been
bullet proof . (and a hell of a lot cheaper than a KRC2 )
Mi Dos Centavos -
Hank K7HP
| 18. Looking to buy a krc2 (wa8wzg at wa8wzg.net)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
