Hank,
He should email [email protected] for the most certain response.
In the meantime, the encoders for VFO A and VFO B are the same - so he
should swap them to see if the problem follows the encoder. If it does,
then a new encoder will fix it. If not, it is more involved and will
require additional assistance from Elecraft support.
If he does not know how to remove the Front Panel assembly and swap the
encoders, he should download the assembly manual to see how it goes
together and then reverse the procedure.
73,
Don W3FPR
On 2/17/2021 4:08 PM, Hank Garretson wrote:
My buddy Kurt, W6PH, who is not on the list, has a K3S. Recently the VFO
knob has been intermittent and it is now total fail. Does not change
frequency. When he goes to CONFIG or MENU, VFO knob does not change
anything. All other knobs and buttons work including VFO B.
Kurt called Elecraft support and was directed to voice mail.
Any ideas?
73,
Hank, W6SX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
