Frank,
Do you have the new encoder? I don't know which SN they were started.
That is the key to which knob you need. If the knob is off, lift the
fiber washers and check to see if there is a green tab in the hole to
the right of the encoder shaft. If the hole is empty, you have the new
encoder.
Order the new knob from Elecraft - they no longer have the older knob.
With the new knob, you need 3 fiber washers stacked.
73,
Don W3FPR
On 4/25/2021 9:00 AM, Frank Krozel wrote:
I am looking for a tuning knob for a K2 SN 5630
If I recall there were two different sizes of shafts, this would be the second
(maybe current) size.
This is SN
-73- Frank KG9H
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
