How about Precision 120M??
73, Lou KE1F
On 5/28/2021 01:47, Bob McGraw wrote:
It's really hard to beat a Simpson 260 or Triplett 630.
73
Bob, K4TAX
Message: 2
Date: Tue, 25 May 2021 13:07:56 -0400
From: djchase<[email protected]>
To:[email protected]
Subject: [Elecraft] New KX2 VFO knob wobble.
Message-ID:<[email protected]>
Content-Type: text/plain; charset=utf-8
Hi, new KX2 owner here. My new KX2 was delivered on May 10, and had a
significant wobble in the VFO knob.? After carefully removing the
knob, I discovered that the majority of the wobble was due to the
loose fit between the outer structure of the control and the panel
opening.? I have temporarily carefully shimmed the gap with some 24
gauge wire, but I believe that a more permanent solution would be a
locknut on the control housing which I do not have.? ?With this
temporary fix in place, the tuning knob works well.? I contacted
Elecraft Support on May 11 or 12 regarding this situation, but have
not received a reply.? Does anyone have any suggestions for a more
permanent fix?? Thank you in advance.? Dave, K8RXB?Sent from my Galaxy
------------------------------
Message: 3
Date: Tue, 25 May 2021 15:01:18 -0400
From: Erik Tkal<[email protected]>
To:[email protected]
Cc:[email protected]
Subject: Re: [Elecraft] T1 Tuner Kit Control Board final check issues
Message-ID:<[email protected]>
Content-Type: text/plain; charset=utf-8
Hi Don,
Yeah, I don?t often perform measurements on components already
installed in a circuit, so the behaviour was confusing. I thought I
bought a nice DMM but I guess it was just a fluke?
Anyway, I got it finished and everything is operational, now just have
to wait for the IC-705 interface cable!
Thanks and 73,
Erik Tkal - W1QED
On May 24, 2021, at 18:01, Don Wilhelm<[email protected]> wrote:
Erik,
Yes, using auto ranging on the DMM can cause false readings. Try to
set the fixed range a bit above the highest expected resistance for
the best results. It all depends on the voltage the DMM applies to
the circuit. Too high a voltage can make ICs and transistors conduct
causing a low reading.
73,
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
