I would advise you to download and install the latest FTDI drivers from
the FTDI website.
My understanding is that Win 10 does no longer include the FTDI drivers.
73,
Don W3FPR
On 7/2/2021 10:03 PM, Mike Dodd wrote:
My K3s, KPA500, and KAT500 are connected to my Win 8.1 Pro PC, and
everything works fine. I am about to replace the Win 8.1 box with a
Win 10 Pro box, and need to connect the Elecraft equipment to it.
QUESTION:
I have a PDF document, "Application Note AN_396 FTDI Drivers
Installation Guide for Windows 10, Version 1.0, Issue Date:
2016-02-02." Are these instructions correct and current, or is there
later information I should read?
Or is the FTDI driver already installed in Win 10 Pro, so I don't have
to do anything except plug in the USB dongle?
Thanks for any information.
73, Mike N4CF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to d...@w3fpr.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
