Hi Doug,
I transmit using DATA-A mode. You might also check to be sure you have
your computer audio feeding the active input port on the K3.
If you get really stuck, send me a not off list, and one of us can call
the other, and I can talk you thought rig setup.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 7/3/21 2:35 PM, doug dietz wrote:
Guys
I have k3 with all the options available except finals. I have installed the
ftdi driver. The receiver sends frequency and decodes wsjt signals correctly.
In the wsjt program the cat test turns green and the ptt works ok. When I call
cq the transmitter is keyed but no power is sent out. I think I’m in the wrong
mode. Any suggestions. I cannot get it to “data a”? HELP
WD8Z. Doug
Sent from my iPhone
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
