Yup, it's the 90% stuff. It was impossible to get a year ago, but not
too bad now. Still, I had to wait a month or so when I ordered it from
Amazon.
- Jerry KF6VB
On 2021-07-14 16:06, John Marvin wrote:
Hopefully this is obvious, but make sure you are using the 90-91%
isopropyl alcohol, and not the 70% variety. It can still be hard to
get the 90% variety these days.
73,
John - AC0ZG
On 7/14/2021 4:41 PM, Peter Eijlander (PA0PJE) wrote:
Yes Jerry, isopropyl alcohol does this!
I once cleaned a working print of a GPS receiver with isopropyl
alcohol and it stopped working. Letting it be and trying it again next
day turned out it worked perfectly again.
From then on I leave a PCB to rest after cleaning to have the IPA dry
out completely...
73,
Peter - PA0PJE
Op 14-07-2021 om 14:54 schreef jerry:
Actually, I suspect that when I scrubbed it with isopropyl alcohol,
it
shorted out
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
