On 8/5/2021 1:18 PM, Mike Dodd wrote:
So if you want to run a KPA1500 from 120V, tell the electrician the
current draw at 120V, and ask him about running a 30A 120V circuit to a
30A receptacle.
Oops! I just looked at the KPA1500 specifications and found this for
Supply Voltage and Current: 200 to 250 VAC, 50/60 Hz up to 20A.
There is no mention of 120V, so your electrician will need to run a 240V
circuit (probably 25A or 30A) to a correctly sized 240V receptacle.
You'll need to cut off the 120V plug and install a mating 240V plug on
that power cable.
--- Mike N4CF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
