As mentioned, one day it worked, overnight while I slept, gremlins at work.

Unit powers up but will not receive or transmit. White noise is heard and all 
buttons seem operable. The only issue I do notice, when ATU is tapped, instead 
of a number indicating swr, two bars horizontally appear and at the bottom of 
the display 5W is displayed. Somehow I think nothing is burned but an 
adjustment needs to be made. P3 is operational but of course not showing scales 
or waterfall. Upon advisement from others, I undid the top and see nor smell 
and burning or charing, I am asking for help in plugging back in speaker plug 
as well. It came unplugged during removal of top and I want to make sure it 
goes back where it came from.

I have two other radios running off an MFJ switch 1700c, and they RX/TX. 
Perhaps I tapped or held a button and have disconnected RX/TX and could be 
easily rectified without a long and costly trip back to Made In America. I live 
in Syracuse and hate to think of the gorillas along the way handling my “stuff.”

Any ideas and or instructing me where the speaker plug would be helpful. I am 
not a builder, nor a contester…the unit is casually used, and there are very 
few “Elecrafters” here in Central New York to speak with. Oh, I went back to a 
prior configuration from Doug Nathan at Made In America, and did a revision of 
firmware 5.67 which was successful.

Any help would be appreciated and useful. I can’t see how one day it is perfect 
and the next day it is not.

Thanking you all in advance,

Richard Isaacs
W3RKI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to