Thanks to the several who replied, and especially to Don for the exact information that I needed.
73, Paul - N8XMS 100% QRP CW > On Aug 23, 2021, at 3:25 PM, Don Wilhelm <[email protected]> wrote: > > Paul, > > You must construct the special cable that is specified in the KIO2 manual - > you can make it a short one if you want. > That cable has a DE9 connector on the PC end which you can plug into a serial > port or into a USB to serial adapter - The KUSB sold by Elecraft is a good > choice -- if you choose another USB to serial adapter, make certain it uses > the FTDI chipset. > > 73, > Don W3FPR > > On 8/23/2021 1:22 PM, Paul Huff wrote: >> I am thinking about adding the KIO2 RS-232 serial interface to my K2 but I >> don’t know very much about computer hardware. Would the KUSB serial cable >> that is also sold by Elecraft then be needed to connect the KIO2 to the USB >> port on my Mac computer? Or is there something else that would be needed? >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
