While your KX3 with the Ni-MH batteries installed is ON with an external power supply, tap DISP and rotate the OFS/VFO B nobl to find BT voltage. This lets you know the battery voltage. My KX3 with fully charged Ni-MH batteries shows “BT 10.7V”. It should be more than 8V with new Ni-MH batteries. If your KX3 shows very low voltage, something in your battery holder is wrong. First thing to check is battery direction in the holder.
73 de JH3SIF, Keith > 2021/09/24 6:24、[email protected]のメール: > > I got my new factory built KX-3 last week. I just installed new eneloop pro > NI-MH batteries and the radio will not turn on using the batteries. Using a > power supply I changed the charger settings per the manual, when I try to > close out of the menu I get a batt err message. > > Yes the charger was installed at the factory. > > I also tried a new set of Energizer Max still will not turn on. > > All batteries are new and the voltage is as it should be. > > I also checked battery plug in the radio it was tight. > > I did check polarity several times. > > Any ideas??? > > TIA > > Larry NA0F > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
