One of the first clues to look for in regard to the audio level out of
the computer being low is the PTT LED on the Signalink USB does not
illuminate on transmit command from the software.
A second thing is to check the CODEC to see that the correct one is chosen.
If one has the PTT LED illuminating on the Signalink USB, you have the
correct audio level and correct CODEC chosen from the computer.
73
Bob, K4TAX
On 10/7/2021 4:05 PM, [email protected] wrote:
Message: 17
Date: Thu, 7 Oct 2021 10:40:56 -0400
From: Carter Craigie<[email protected]>
To: Elecraft List Members<[email protected]>
Cc: Kay Craigie<[email protected]>
Subject: [Elecraft] K2 + WSJT transmit problem solved
Message-ID:
<caowp2qykwo7cgprnzyudafpjefbt8eujhoib+vfxyabrmfg...@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Thanks for the helpful suggestions about why my K2 would not go into
transmit via my Signalink and various digital programs. It turned out that
a sound setting in Windows was messed up so that audio from the computer
was not getting to the Signalink.
Took a screen shot of the setup so next time (and of course there will be a
next time) maybe I can answer my own question.
73, Carter N3AO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
