Are you using CAT on the PC, VOX on the SignaLink, or VOX on the KX3 for PTT?
On Fri, Dec 3, 2021, 13:23 David Haines <[email protected]> wrote: > I'll send this to the group before I start taking things apart: > > Running KX3 with KXP100 using SignaLink on 40m. I've been using FT8 > successfully for over a year. Then last night something new: > > When I transmit (either the TUNE button of WSJT--X or replying to a CQ) > the signal goes out successfully. When the TX ends, the red LED on the > SignaLink goes out but the TX red LED on the KX3 stays on. > > And -- this is the weird part -- the RX signal is gone -- absolutely > nothing on the waterfall or from the speaker. > > This does not happen when I push the TUNE button on the KX3. > > Ideas? > > david > KC1DNY > Butler Hill Farm in the woods of Maine > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
