Hello Richard Ferch: Saturday, December 4, 2021, 8:38:26 PM, you chiseled out:
> To use the RxAnt In/Out BNC connectors in the KXV3, you need to select the > RX Ant from the front panel RX Ant switch. I have a Mini-Circuits splitter. It comes off the Rx-Out of the K3s. The other two of the splitter go to SDRC and K3s Rx-In first off, it seems the SDR device is only getting decent output, vis-a-vis Band, from whatever Band I have the K3 set to. Secondly, it seems that the K3 then is about 6 S-Units down on the same band than it was without the "Rx Ant" being pushed on the K3. -- Best regards, Bob KD7YZ EM88LL ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
