Tom I've found that pressing tune again, immediately after a tune sequence sets it off to do "fine tuning" which might help.
David G3UNA > On 07 December 2021 at 11:59 Tom Boucher <[email protected]> wrote: > > > Thanks NK7Z, NK7I and K8CN for responses. > > Dave and Rick indicated that running the K3 at a higher power level during > the ATU Tune sequence might solve the problem however, as far as I can see, > the power level is fixed at 5 watts during auto tune and cannot be altered. > > Mike, there is no problem with the Ant 1 and Ant 2 ports and manual > selection of L & C works OK. The ATU just won't end up with the right > settings for lowest SWR. The problem has not always existed. > > 73, > Tom G3OLB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
