Hi Ted, For keying my K2 I use a special CW-usb cable and that works fine in N1MM
You can find this cable on Alieexpress or Ebay 73 Jos Pa3hgx https://www.aliexpress.com/item/1005003191002335.html?spm=a2g0o.productlist.0.0.53273477baWUna&algo_pvid=f9d38970-0a0f-47d4-8aee-8a1b992bf842&algo_exp_id=f9d38970-0a0f-47d4-8aee-8a1b992bf842-1&pdp_ext_f=%7B%22sku_id%22%3A%2212000024583047966%22%7D Verstuurd vanaf mijn iPad > Op 7 dec. 2021 om 22:14 heeft [email protected] het volgende geschreven: > > I need advice for getting N1MM+ to play well with a K2. I have tried it > with two different K2 rigs: a K2 with a KIO2, and a different K2-100 with > the built in IO. Same problem. The K2 Port parameter is set to ON and N1MM > tracks the RX frequency, so I know the rig and the computer are > communicating. But a keyboard command from N1MM to the rig returns the > error message -- "Unable to send this CW because there is no CW Port set in > Config." > > But the CW box in the N1MM configuration screen IS checked, and "set," and > config is: 4800 N 8 1 DTR and RTS Always On (and every other possible > combination thereof); Radio on Nr 1, and PTT via radio command mode CW. I > have also tried every possible permutation of KIO2 and KUSB cables, on both > rigs, in case of a badness there. No change. Same problem every time. > > I know that when using my K3 with N1MM it's necessary to have the K3's menu > settings for DTR and RTS set properly to CW to match the settings in N1MM . > . . but I have found no such option in the K2 menus. I have also read that > it can be done using a W1EL keyer, but having outboard dongles sort of > defeats my purpose. > > Can it be done with just the K2/KIO2, a KUSB cable, and an ordinary > computer? > > Thanks, anyone. > > Ted, KN1CBR > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
