Some additional information
* the firmware version is 1.07, not 1.7
* The yellow LED is flashing in groups of 4 with a period of about 1
second, and a small (<1s) delay before the next group of 4.
* The unit doesn't power off.
* This is with a new battery.
Other than this, it all seems to be working.
Any ideas?
Many thanks!
On 17/04/2022 15:47, Paul Jewell wrote:
Good afternoon,
I have a Elecraft T1 tuner which I used last summer, but have had it
stored away for several months. Today I have been trying to use it
again with my KX3, but I am having an issue which I can't resolve. The
yellow LED is flashing continuously, as it would when selecting or
deselecting the tuner. In fact, tapping the BYP button without first
tapping the PWR button does exactly that - the tuner is toggled
between in-circuit and bypass, as demonstrated by the yellow and green
LEDs. The info function seems to work as expected as well. The other
issue - the unit doesn't seem to turn itself off - If I leave it with
the battery in, the yellow LED continues to flash seemingly indefinitely.
I don't remember this behaviour last time I used it, and looking in
the handbook seems to suggest it isn't the normal behaviour. Can any
of you give me any advice about this issue? According to the sticker
on the processor, I am running firmware 1.7 1.07.
Many thanks!
Best regards,
Paul
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
