Thanks Andy, I can locate it from here... Having a bit more info will
help in seeing what needs to be checked!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 5/20/22 07:55, Andy Durbin wrote:
"I seem to remember there was a change for those wire links but don't have the
details here."
This discussion suggests there were two board configurations - one with both
links on the same side of the board and the other with one link on each side.
It's not clear when the change was made or even which is the later
configuration.
http://elecraft.85.s1.nabble.com/KAT-500-Unreliable-Tuning-td7668468.html#a7668497
Another thread said separate the wires and insulate them if they had arced.
There may be more discussion to be found with a more thorough search of the
archive.
Sorry, have not experienced the problem and don't have a better answer.
Andy, k3wyc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
