Wolfgang,
In my experience, that is not necessary.
It IS necessary to have the bottom cover in place before running CAL PLL.
73,
Don W3FPR
On 7/30/2022 11:25 AM, Wolfgang wrote:
Hi,
in a german QRP forum I found this hint from Peter, DL2FI (SK).
In any case, the PLL calibration must be redone whenever the bottom
cover of the K2 has been opened.
This statement does not correspond to the instructions in the K2
manual and other contributions here. Also, I can't understand the
reason behind this statement.
Therefore my question, of it is really so that "CAL-PLL" must be done
again after *each opening* of the lower housing cover?
Since Peter is SK, I can unfortunately no longer ask him myself.
73, Wolfgang
DL2KI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com