You can do it with just an RCA cable if you have the keying mod on a K2/10, or a K2/100. N6TV can make you a Serial box that gives you band info, too, if you have the K2 serial interface, but I could hear the KPA1500 polling the K2--I don't think that was a problem with the Serial Box, but I never solved it.
DO NOT CONNECT THE K2 SERIAL OUTPUT TO ANYTHING WITHOUT A CUSTOM CABLE OR AN N6TV SERIAL BOX. I got about 250w out of the KPA1500 with my K2/10, and of course full-tilt disco boogie with my K2/100. 73 Eric WD6DBM On Wed, Jan 11, 2023, 4:03 PM Karin Johnson <karin...@tampabay.rr.com> wrote: > Hello Group: > > Can I use a Elecraft KPA1500 with a Elecraft K2??? > > What accessory cable will I require???? > > > > Karin Anne Johnson K3UU > > Palm Harbor, Florida > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to norrislawfi...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
