Are you using com port 10 on all applications? Bob, W1EQ
Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: [email protected] <[email protected]> on behalf of Pete Smith N4ZR <[email protected]> Sent: Tuesday, May 2, 2023 2:50:20 PM To: Elecraft List <[email protected]> Subject: [Elecraft] Serial port woes with KIO3B Yesterday, I installed a KIO3B update kit in my K-3. Everything appears to work OK except for the USB serial port. At first, this morning, everything seemed to be working OK - the K3 was controlling my amp and reading out frequency to DXLab Commander. I started trying to configure N1MM to read radio frequency, and things went steadily downhill from there. At this point, I have no frequency readout on either program, and cannot send F-key messages from N1MM. I have tried every available COM port under Windows 10, and checked for hidden ports (none). I have restarted the computer several times with no change. Can anyone suggest something to try, or a test that might reveal what's going on? -- 73, Pete N4ZR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
