I want to thank those who made suggestions on how to find my problem. I spend a couple of hours relearning how to use my main backup rig (an Orion 2---it is not a useful backup if it takes that long---I guess I need to turn it on and make all of the necessary changes in switches and settings more often). Then I spent a bit more time figuring out how to get it to do FT8. After I did that and made a few QSOs, I thought I would make the changes to go back to the K3. When I did, the noise problem was no longer there.
I have no idea what was going on. But now I can change to my backup in minutes instead of hours. 73, Bill K0KT From: Meeker, William Q [STAT] Sent: Tuesday, June 06, 2023 11:32 AM To: [email protected] Subject: Noise problem with my K3 For the first time in its 13-year life, I am experiencing a problem with my K3. I first noticed this last night while operating FT8 where the waterfall lit up in yellow. At first, I thought it was some kind of RFI, but it is pretty much the same on all bands and antennas (including my dummy load). It sounds like white noise and varies between S2 and S3. I also checked with another radio this morning, and the noise is not present. So it seems to be generated inside the radio. Everything else seems to work fine, but hearing weak signals is not possible! Any suggestions would be welcome. 73, Bill K0KT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
