We thought about that when we designed the KPA500. Take a look at page 29 of the K3S Rev A manual - "Per-band Power Control”. You need to have the KPA500 communicating with the K3 through the Aux I/O cable.
It works amazingly well, no macros needed! 73, Jack, W6FB > On Dec 5, 2023, at 12:35 PM, Robert Strickland via Elecraft > <elecraft@mailman.qth.net> wrote: > > Is there a way to program a macro within the K3s to set power level(s)? My > goal is to be able to shift between low power barefoot [100w] and a drive > level for the KPA500 [15-20w]. Thanks > > ...robert KE2WY > -- > Robert G. Strickland, PhD ABPH KE2WY > rc...@verizon.net > Syracuse, New York FN13xa > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jackbrin...@me.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
