Hi Jim, I don't have an answer to your question, but will note that you are the 2nd person in the last month to report this issue. Thomas, WA8UNS also experienced repeated random resettings of the CAL TPA parameter to large values, often in excess of 200. He reset the parameter to the actual room temperature (in Celsius), things worked for a bit, then the PA Hot message reappeared. It's not clear yet if this random resetting occurs if the KPA100 module is bypassed by setting the POWER control to less than 10 watts.
If you can replicate the issue on a dummy load, that would be of much interest. RFI in the shack is always problematic and can lead to weird issues. 73, Mike, K8CN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com