When Windows updates it sometimes changes my KX3 settings.  Not exactly something you would think of when trying to diagnose a problem with the radio.  If your K2 is connected to Windows in any way, that might be the explanation.

73,

david
KC1DNY

On 2/16/2024 11:58 PM, Jim KO5V wrote:
Good Evening,

As I was talking on 20M SSB tonight, my K2/100 started to get a bit twitchy 
when I transmitted. The power was set to just below 100W. I started seeing an 
intermittent 'High Current' error message, which then changed to a constant 
'Hot PA' error. I have an intermittent RFI problem on 20M (which I thought I 
had solved), so that might have returned and caused this problem.

I tried matching the antenna with the KAT100. It would not arrive at any 
solution - there were no relays clicking. I had to press the 'tune' button 
again to stop it. Toggling the power on the rig made no difference.

So I searched the list's archives, and found a thread where Don mentioned the 'CAL TPA' 
menu. I found that it was at its maximum setting of 150C - I have set this parameter 
twice since building the radio 7 years ago. Resetting it to about room temp fixed the 
problem, and the radio now behaves normally. I also checked "CAL Cur", and it's 
still set to 3.50.

So, it is working again, but why did the 'CAL TPA' setting go to it's max? Is 
there a known problem? Maybe it's a glitch from the RFI, but I thought I should 
ask just in case there is something else I should check.

Thanks. 73,

Jim KO5V
Cedar Crest, NM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to dhai...@bates.edu

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to