Hi I have just performed all the mods on the KPA100 and reset the FWD and
REF and set the bias at 400mA, my bird watt meter tracks the indicated
power on the K2
After fitting the screen and putting it all back together it works fine
on SSB.
On low power tune is fine, however on more than 11 Watts pressing tune
causes the power to jump to 140 and the SWR 2.2:1, so suspecting it is
"hooting" when all back together.
Before I dive in an suggestions?
KR
Andrew
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
