I have not had any problems with HRD or N1MM on VFO B. I am using an older Laptop and a newer desktop, both using the serial port. Perhaps you are having Some issues with the USB/serial adapter. It may not be stable, or is dropping Data. The data rate on the K2 is fairly slow.
Mike AI4NS -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ken Alexander Sent: Sunday, October 29, 2006 3:39 PM To: KT5X; [email protected] Subject: Re: [Elecraft] N1MM Contest Logger VFO B issue I updated my copy of N1MM Logger (v6.10.10)in the hope that I would be able to get into the CQWW this weekend and noticed that it didn't recognize VFO B either. On a related note, I downloaded, installed and configured Ham Radio Deluxe a few evenings ago and found that it's ability to display the K2's frequency was very shaky. If the K2 was tuned to 7015.45 kHz then HRD would display the correct freq for a few seconds, then it might display something like 701 for a few seconds, then 545 for a few more secs, then some other combination of digits from the freq next...changing every 10 or 15 seconds. The K2 is connected to my notebook via the cable provided with the KIO2 and through a serial-to-USB converter. Any help would be gratefully accepted. 73, Ken Alexander VE3HLS _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
