I replied to the original post on this, and I believe I came to the wrong conclusion. My excuse is that I'm new with N1MM !
When I tested this, I activated VFO B by just switching the VFOs on the K2. That activated the VFO B bandmap, and I concluded that VFO B was the "active" (my term) N1MM VFO. But after reading Ken's post below, and playing with the Logger some more, I realize that even though the VFO B bandmap is activated by switching to that VFO on the K2, the VFO A data entry window still has the focus and consequently the log entry reflects VFO A. Apparently one must click on the VFO B data entry window to make VFO B "active", no matter which VFO is selected on the K2. This is a little confusing because the K2 will be transmitting on whatever VFO it has active, but maybe this is the desired behaviour for some reason??? My appologies for any confusion I may have created. 73, Randy, KS4L > > Hi Mark: > > I'm no expert on N1MM logger but I have used it with the K2. > I just tried it using v6.10.10, but I know this has worked > before with earlier versions. When you use both VFO A and VFO > B, you need to have 2 data entry windows open, one for A and > one for B. There are key shortcuts to switch back and forth > between A and B but if you simply click in the bandmap for > VFO B, the focus for everything switches to the VFO B entry > window and anything entered there will be entered correctly > into the log. If you then click on the bandmap for VFO A, > everything shifts back to the entry window for VFO A and the > data will be logged correctly with VFO A data. If you have > ONLY the entry window for VFO A open and use that for data > entry while using VFO B, then only VFO A data will be entered > into the log. This has worked for me using both "real" serial > ports as well as the "USB-to-serial" connections. > > I haven't read the help manual/file lately (I must before > next weekend), but it used to be explained fairly well in there. > > The only problem I have had with N1MM and using both VFOs is > with operating split and getting the software to send on A > while listening on B and vice versa. > > Good luck! > > 73, > Ken K3IU _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
