Folks, For those who do wish to record the menu settings (everyone should), I recommend that you download the "K2ATOBKT" manual from the Elecraft website www.elecraft.com and print pages 3 and 4. Those sheets provide a convenient list of all the menu settings you would need if some disaster (like having to do a master reset) should happen.
For those who do not already realize - a Master Reset cleans out all the menu settings in the K2 and sets them to the factory defaults - those defaults may provide an operational K2, but certainly are not the settings that you would want for proper operation. 73, Don W3FPR > -----Original Message----- > > However, your plight underscores something you can do to protect > yourself in > the future - something few have probably done (or kept current). > > That is to write down all your MENU entries including the BFO and > bandwidth > settings for all your filters. > > That way, after tinkering with a setting in MENU and getting > quite lost or, > Heaven forbid, doing a "hard reset" for some reason, the worst that can > happen is that you must re-enter the various settings in the MENU once > again. > > Of course, after a hard reset you must also run CAL PLL as well. > > Ron AC7AC > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
