Mike AI4NS wrote: I am using the Heil HM-5, and the audio is just fine according to reports. I didn't have to do anything special. I set SSb A menu to 2, and SSbB menu to 3-1, And it works well for my voice. Just another option.
--------------------- Excellent point Mike! The SSb A menu will switch in about 10 dB of attenuation if it's set to 1! That's useful when an external mic preamp to over-driving the K2 but will keep many mics from properly driving the rig when connected without a preamp. Even so, I've noticed that several mics won't drive the K2 properly on 10 meters (where the TX gain is lowest) especially if I use any compression. That seems to be the experience of a great many operators. I use an electret element that has an output of about -64 dB. It works FB once I changed R14 to 5.6K. I considered an external preamp, but it seemed to me more efficient to reduce the unnecessary loss at the mic input rather than add external active components to make up for it. Ron AC7AC _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com