Dave, It really isn't necessary to change out L. John, KI6WX also has a web site that outlines the process for remoting the KPA100/KAT100 and his conclusion was L1 didn't need to be changed. After almost a year of operation not having changed L1, I have had no problems.
Joe N9JR ----- Original Message ---- From: Dave Van Wallaghen <[EMAIL PROTECTED]> To: [email protected] Sent: Wednesday, December 27, 2006 1:41:34 PM Subject: RE: [Elecraft] KPA100 Elimination? Happy Holidays to all: In my case I chose to add a KIO2, KAT2 and KBT2 battery option to my basic K2 and then placed my KPA100 with my KAT100 into the EC2 enclosure. My goal was to enable me to unplug a few cables and take my K2 on the road or simply plug it all back in and I'm QRO again. I found the process to be nice and clean and seems to work very well. There is a mod to L1 on the AUXBUS board to the KIO2 that should be performed as well. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
