Dennis, There are adapters that will do the job nicely. The MIL type for that adapter is UG-255/U and Mouser has the Amphenol version as PN 523-2900. They also have the Bomar equivalent (apparently not MIL spec) as PN 678-3317505 but you can find others too - try RF Parts for one source.
The other possibility is for you to get a short piece of coax and a BNC plug and a cable mount UHF connector and build your own adapter. If you are using the 1/2 inch coax, a short adapter of that nature is the best choice since the heavier cable can pull the K2 off the table. Yes, you can find several companies that will make up custom cables, but you may not like their prices for a single unit. 73, Don W3FPR > -----Original Message----- > > Does anyone out there know of a company taht could assemble a > "pigtail" assembly for the k2 ant connection. I have never had ham gear > with BNCs . One end of coax would be BNC and the other SO-239. > Dennis Vavra, AD5LY -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.17.3/642 - Release Date: 1/20/2007 10:31 PM _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
