One thing to be aware of is that if you're using the bail to hold the front of the K2 up at an angle, many of the adapters will hit the table in back because of how close the BNC is to the bottom of the K2 back panel. One solution is to add a BNC right-angle adapter ahead of it.
Of course, there's one simple solution: add the Elecraft KPA100 module. It comes equipped with an SO239 connector all ready to go. At $389 it's not a cheap adapter, but you get a 100 watt 160-10 meter amplifier thrown in for free. Seriously, this issue of "which connector" is a pain that shows no sign of getting better. BNC's are quick and easy to work with and will handle the legal limit easily but a pain to use with larger-diameter coaxial cable. And then there are all the variations such as Type N as well as gender combinations. Over the years I've acquired well over $100 of adapters just to deal with all the various options I encounter. I've always found that a good quality adapter costs much less than a cheap one; I've still got some Amphenol adapters I bought in the 1950's, but I can't tell you how many cheap ones from various manufacturers I've purchased over the years and thrown away because they developed an intermittent or even became open inside. It's a real "downer" to spend an hour or so troubleshooting a problem with an apparently bad cable only to finally discover it's a flaky adapter at one end instead! Ron AC7AC -----Original Message----- Dennis, there's BNC->SO-239 plugs widely available, you can pick one up at your local Radio Shack... -J On 1/21/07, Dennis Vavra <[EMAIL PROTECTED]> wrote: > Does anyone out there know of a company taht could assemble a > "pigtail" assembly for the k2 ant connection. I have never had ham > gear with BNCs . One end of coax would be BNC and the other SO-239. > Dennis Vavra, AD5LY _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
