Nigel, Do you have the encoder mounted on the wrong side of the board? Since all the wiring is on the PC board, that is the only way I can think of to change the encoder direction.
That is not normal - check to be certain you do not have a solder bridge or unsoldered connection somewhere: At the encoder Z1,RP3 or U1 pins 3 and 4. Be certain you have a path with about 10k resistance between encoder pin 1 and U1 pin 3 and a similar path from encoder pin 3 to U1 pin 4. I guess it is possible that you could have a bum decoder with the outputs swapped internally, but I have not yet heard of such an occurrance. 73, Don W3FPR > -----Original Message----- > > I was surprised to find on my recently completed KX1 that > clockwise rotation > of the VFO knob Decreases the frequency and moves Up the menu list. Is > there a way to reverse this so that clockwise rotation Increases the > frequency? > > 73, Nigel ZL2DF > > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.17.31/676 - Release Date: 2/8/2007 3:04 PM _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
