That's correct David. If they're installed backwards one may need to use a non-conductive screwdriver to align them. The idea is to have the screwdriver slot at RF ground. That way a metal screwdriver can be used. If the slot is "hot", touching it with a metal screwdriver will detune the circuit.
Ron AC7AC -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Wilburn Sent: Monday, March 19, 2007 7:26 PM To: eKotz; [email protected] Subject: Re: [Elecraft] K2 Trimmers - Which flat side? To the best of my ability (e.g. memory) I put the shorter flat side along the flat side on the silk screen, and the long flat side against the long rounded side of the silk screen. I just finished my rig over the weekend and aligned it without issue. David Wilburn [EMAIL PROTECTED] K4DGW K2 #5982 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
