By default it is 600 Hz. That is the ST P setting in the menu.
David Wilburn
[EMAIL PROTECTED]
K4DGW
K2 #5982
Brett gazdzinski wrote:
I re-did my filters tonight, made up a headphone adaptor,
and did some tuning around after cleaning up the shack
from the rig building.
I listened to 80 meters for about 1/2 an hour, the rig
seemed to be working very well, loads of signals on the air,
and I went to send a V in an open spot and check the swr.
That is when I found the antenna was not connected...
I am going to wait for the kat2 antenna tuner to arrive
before I worry any more about power output problems.
One issue I have is the CW pitch. I had a mini QSO with the icom
and the K2 seems to have a different offset, like 600 Hz
difference, I corrected it with the K2 RIT.
What sets the offset in the K2?
Brett
N2DTS
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
