Yes, it most certainly does.
David Wilburn
[EMAIL PROTECTED]
K4DGW
K2 #5982
Brett gazdzinski wrote:
When you change the sidetone pitch, say to 800 Hz,
the cpu does its magic and changes the bfo frequencies, per
the manual (I keep re reading it).
Mine seemed to take a while to update, or it needed to be
power cycled or something, its real close to the 756 pro now.
The cpu seems to be doing lots of stuff inside the K2!
Brett
N2DTS
-----Original Message-----
From: David Wilburn [mailto:[EMAIL PROTECTED]
Sent: Friday, March 23, 2007 11:22 PM
To: Brett gazdzinski
Cc: [email protected]
Subject: Re: [Elecraft] finished with the k2 for now.
By default it is 600 Hz. That is the ST P setting in the menu.
David Wilburn
[EMAIL PROTECTED]
K4DGW
K2 #5982
Brett gazdzinski wrote:
I re-did my filters tonight, made up a headphone adaptor,
and did some tuning around after cleaning up the shack
from the rig building.
I listened to 80 meters for about 1/2 an hour, the rig
seemed to be working very well, loads of signals on the air,
and I went to send a V in an open spot and check the swr.
That is when I found the antenna was not connected...
I am going to wait for the kat2 antenna tuner to arrive
before I worry any more about power output problems.
One issue I have is the CW pitch. I had a mini QSO with the icom
and the K2 seems to have a different offset, like 600 Hz
difference, I corrected it with the K2 RIT.
What sets the offset in the K2?
Brett
N2DTS
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
