I do hear hiss and white noise, no propagated signals whatsoever, except one
very light cw transmission that sounded kind of like thumps on the wrong
side of the band. And as I mentioned, I can hear internal sidetone.
----- Original Message -----
From: "David Wilburn" <[EMAIL PROTECTED]>
To: "Elecraft" <[email protected]>
Sent: Saturday, April 07, 2007 4:25 PM
Subject: Re: [Elecraft] K2 no receive . . . where to start?
No receive as in dead, no noises, or no receive as in I do not hear a
signal where I think I should? Do you hear the birdie at 7 Mhz?
David Wilburn
[EMAIL PROTECTED]
K4DGW
K2 #5982
Mike Geddes wrote:
Finishing up K2 6042 today. Have fine output on all bands, but no
receive! I did use another HF rig to create signal for alignment . . .
and I did hear that. I can also hear SPOT, so think amp is okay. But
nothing from antenna. For reference, I connected my K1 to same antenna
and receive was fine. I checked voltage at anode of D6 on the K2 and it
is fine. Not sure where to go from here. Any suggestions?
Thanks and 73,
Mike
N4JX
K1/4 2319 on the air
K2/100 6042 under construction!
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft Help:
http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
