Joel,
You first must set the 'DISPLAY' to the S-meter mode - then:
The Lnn parameter is set for no bars with no signal (antenna
disconnected), and the Hn parameter is set to adjust the high level end.
If you have a signal generator with a 50 uV output level (like the
Elecraft XG1 or XG2), you can set the indication to S-9 with that 50 uV
input. The Lnn parameter must be set first. The numbers you see are
the default values or the previous settings.
If you still have problems understanding the sequence, please ask again.
73,
Don W3FPR
Joel Weder wrote:
I've been trying to figure out how the heck to use the SIG menu item in my
KX1. There's virtually no description of how to set it up, other than the
cryptic notes in the Menu Functions section on page 65. Can anyone explain
what the parameters (eg) H5 and L84 are supposed to mean, and exactly what
procedure should be used to set the S-meter?
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
