I don't think there is a need for the delay to be incorporated in the monitor audio - it should be possible to either put the delay after the take off for the monitor or have a separate path though the DSP for the VOX detection. Understand and agree with your findings though, I have an SDR-1000 and the latency in the monitor makes it impossible to use with headphones.
73 Paul M1PAF -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Augie Hansen Sent: 26 June 2007 21:45 Cc: [email protected] Subject: Re: [Elecraft] K3 VOX question >> Will the K3 DSP software include a delay in the transmit audio chain to >> prevent the "missing first syllable" issue that is common with other VOX >> systems? > > That is our intent. One rig that uses a fixed audio delay effectively to avoid the "missing first syllable" problem is the Kenwood TS-870. But an unintended consequence of the design is that the transmit audio monitor is, at least for some users, difficult or impossible to listen to. I prefer to monitor my audio to be able to quickly detect problems, but find I have to turn off the monitor on an 870. If an audio delay is used in the K3, I suggest that it should be possible to adjust or at least disable it as a configuration option. Gus Hansen KB0YH _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
