Joe and all,
I have the same questions.
Since no one has explained the difference between 'Transmit mode' and
"the K3 is now transmitting since QSK has been started with a keypress"
- I would believe that the PTT input is redundant when in QSK or
Semi-break-in modes.
Yes, a little clarification (or language lessons) seem to be appropriate
here.
How is 'Transmit mode' different from 'transmitting already because the
key was tapped'?
Does closing PTT when in QSK mode inhibit a return to receive until the
PTT is released? - that is the only thing I can think of.
It certainly seems that the generation of RF is controlled by the
paddles in any case (except for the new TX inhibit condition). A few
things were clarified, but confusion still reigns high in my mind.
73,
Don W3FPR
73,
Don W3FPR
Joe, aa4nn wrote:
Do you mean
"...closing PTT has no effect because QSK already
has you in transmit mode?"
Or while in QSK mode must you closs PTT in order to transmit?
de Joe, aa4nn
This is in addition to the regular semi- and full-QSK modes. AND, if you
are in semi- or full-QSK mode, closing PTT still puts you in transmit mode.
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
