> This is the way virtually all IKenSu transceivers work today. > In other words, PTT has priority. It's as simple as that. > Pressing PTT puts the rig into TX state, muting the RX, until > it is released. Doesn't matter if you're doing QSK or > semi-QSK. Hitting the foot switch overrides that > functionality instantly for as long as it's held down (but no longer).
This is exactly how PTT interacts with QSK and SEMI break-in when the latter two are enabled. When they are DIS-enabled, then PTT has 100% priority to put the K3 in transmit state and remove it from transmit state, i.e., return to receive state. > I don't think this is quite what the Elecraft implementation > does, as it sounds like you have to actually be in "PTT mode" > by manual operator setting in order for PTT to put the rig > into the CW TX state. As explained above, the K3 does BOTH. 73, Ed - W0YK _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com